Float Switches & Level Control · Global Supply E-mail: szace@foxmail.com
Industrial Control › FLOAT SWITCH

CX-80AB Float Switch Flow Sensor, 5 m Cable

CX-80AB float switch flow sensor — a cable float switch combined with a flanged flow-sensing body, so one flanged connection both switches the pump and reports flow, 10 (8) A at 250 V / 10 (4) A at 380 V, IP68CS, cable lengths 2 to 10 m.

  • Industrial Control › FLOAT SWITCH: Industrial Control › FLOAT SWITCH
  • Model: 9024
  • Brand / OEM: ELEHPD — OEM branding available
  • Export: Worldwide, FOB Ningbo / Shanghai
Request a quotation for this float switch

About the product — CX-80AB Float Switch Flow Sensor, 5 m Cable

The CX-80AB Float Switch Flow Sensor, 5 m Cable is part of the ELEHPD float switch range, manufactured in Yueqing, Zhejiang, China and supplied factory direct to distributors, wholesalers and panel builders. ELEHPD float switches are used in tanks, pits, sumps, sewage water and pump control, and are built to IEC/EN standards with CE marking.

The UKY series is the workhorse cable float switch and the basis of the ELEHPD float switch range. A moulded polypropylene body carries a steel ball and a sealed microswitch; as the liquid rises the float tilts and the circuit switches, starting or stopping a pump, opening a valve or raising an alarm. The float hangs from a flexible PVC or HO7RN-F cable with a polypropylene counterweight, and the switching level is set simply by sliding the counterweight along the cable — one screw, no tools. Rated 250 V AC with 380 V maximum isolation, or 120 V AC for 110/120 V export markets, in 16 A (8 A), 10 A (8 A) or 10 A (4 A) versions; protection IP68CS for permanent immersion; working temperature 0 C to 80 C with the product rated to 70 C; mechanical endurance over 100,000 cycles and electrical endurance over 50,000 cycles. Five float shapes (trapezium, rectangle, large circular, small circular, ellipse) and five body colours (red, yellow, blue, grey, black) can be ordered, and the 3-core black / blue / brown cable gives both pump-down and pump-up wiring from the same float. ELEHPD factory direct, for clean water, wastewater, mild acid and alkali, and light industrial process duty. The CX-80AB combines a float switch with a flanged flow-sensing body, so a single flanged connection point both switches the pump and reports whether flow is present. That makes it the economical choice for booster sets and pumping stations where a separate flow switch would mean a second tapping and a second cable. The float side keeps the standard sealed PP construction with a 3-core cable for drain and fill wiring.

Typical applications

Automatic pump control and level alarm in water tanks, cisterns, water towers, swimming pools, wells, sumps and sewage pits, plus light process vessels in food and drink, textile, chemical and metal finishing. Use the black-and-blue pair for drain-down pump control and the black-and-brown pair for fill-up. Pumps above 750 W / 1 HP and any three-phase motor must be driven through an AC contactor coil (A1/A2) — the float switch only provides the control signal.

Specifications:

Product typeCable float level switch
Rated voltage250 V AC (380 V max) / 120 V AC
Rated current10 A (8 A) at 250 V / 10 A (4 A) at 380 V
Rated frequency50 Hz / 60 Hz
ProtectionIP68CS
Working temperature0-80 C, 70 C rated
Mechanical endurance>= 100,000 cycles
Electrical endurance>= 50,000 cycles
Float bodyPP
Cable3-core, 5 m
Max. working pressure1 bar
Circuit breaking capacity1 kW @ 250 V, T70U
WiringB+Bl drain / B+Br fill
MountingCable suspended

How to specify the right float switch

When specifying, give us the rated current, the breaking capacity, the number of output points, the switching voltage and current, the mounting method and the cable length. Our engineers will select the matching model for your specification or against a sample.

Pumps above 750 W / 1 HP and any three-phase motor must be driven through an AC contactor coil (A1/A2) — the float switch only provides the control signal.

Related float switch models

Other models in the ELEHPD float switch range: